FRC test kit can be used to check the amount of free residual chlorine present in the water sample. To check for residual chlorine level, 3 drops of FRC reagent are added to sample and concentration is determined by colorimetric comparison of the sample with the chart provided in the box.
Product Description
What is FRC Test Kit?
FRC test kit can be used to check the amount of free residual chlorine present in the water sample. To check for residual chlorine level, 3 drops of FRC reagent are added to sample and concentration is determined by colorimetric comparison of the sample with the chart provided in the box.
Why FRC Test Kit?
Chlorination is one of the widely used methods for water disinfection. However, Chlorination may not be effective in bacterial disinfection if it is not applied in correct dose.
Therefore FRC should be measured to check if the added chlorine is sufficient or not. World health Organization recommends free residual chlorine level of 0.2 – 0.5 mg/L.
Key Features
- Chlorine test kit is used to indicate presence of free residual chlorine in water.
- Low cost, portable and convenient to use.
- Only three drops of FRC reagent is required for one test
- One kit can test 200 samples
- Net volume 30 mL
User’s Instructions
- Fill 3/4thof the vial with the water sample to be tested.
- Add 3 drops of FRC reagent to the sample and to check for residual chlorine.
- Tightly secure the cap of the bottle after each use.
The product was introduced and branded by ENPHO in 2001 after continuous research. It was developed to test of free residual chlorine in water.
For related further information, click on the link below
